AHH back to water

Wizard James · 01-08-2005, 01:28 AM

well.. back to water.. rhino can explain my ideas better.. since i can hardly understand them ..but heres a short little run down.

rad is going to be outside were its ..around -10 to -30 its going to be zip tied to my safty bars then have a litttle roof,

heres the flow res pump cpu hc res pump...

100% window washer fluid so it dont frezz and gives off a nice blue color.

pump and res are going in the cubard above my desk .. drill some holes for wires and hose .. my pump makes a high pitch noise.. i am hoping having it in the cubard will help. .......

rhino56 · 01-08-2005, 02:46 AM

i cant wait to see what the results will be.

Anonymous · 01-08-2005, 09:59 AM

dont use 100% of that stuff you need some water (carries more heat).

Wizard James · 01-08-2005, 11:01 AM

its going to be -20 outside for the next few months.. i am going to mix a bit of water in..not much tho.

i also am having a res.. its a 3 L res.. only half full tho.. going to use that to fill everything.. all custom tho..gota get some more wire today.. well..off to have a bath then i get ready to go and get my stuff.. THANK GOD i get to take the torndao off.. or ..i could use that for the res LOL NOT .. to much power lol.

Wizard James · 01-08-2005, 02:34 PM

FREAKING PERNETS ..god i wish i was older. ffs i am 15. and nooo..everything i think of they decine.. its like .. No NONONONONO that wont work..u cant do that. ..no..

they were cool on everything till i said the window and taking it out and putting foam in placement. (window already comes out..just would have to make a foam window.)

they said (becasue i am in the basement) that mice and bugs would eat though the foam.. well..i was going to be putting something else..donno yet ..that is harder on the outside..but god forbed they work with me,

everything works and would work..but hell..to be able to do anything i want..

they keep saying also what am i going to do when it gets warming.. THE SAME THING EVERYONE ELSE DOES i yelled (yeah..i yell alot...) lower my overclock. so ..the temp goes from -5 to 10 and in summer its 15-25 ....they asked if i am going to put the rad inside..i said no..its only would be cooler by 2-3 dregres..Like wtf is soooo hard to get tho his thick mind (step dad.. i hate him ...hated him since i first meet him).

well..might be a bit longer till i get water cooling.. wana get a ative heatsink for my nb ..thinking a nb-1c with the fan. ..anyone help me here?

if u want i will post a pic of were my computer is and what i am thinking to do ..if words are not helpong

Anonymous · 01-08-2005, 02:45 PM

plywood on the outside??

Wizard James · 01-08-2005, 04:37 PM

i said that to my mom (who is the only one in the house who would sit down with me and talk.) but she keep saying no matter how i did it ..cold air would come tho.

i DONT see anyway ..if i have plywood..and then foam.. and have it all taped up/ or sealed with sealent..

but in spring shes going to get a new window (ahh no far) one that slides..and then i can do what i want...but right now i tink i am going to just put it up above my cabards.

also..since i am going to have it all connetneted.. is there ..a quick release thing i can put right in the middle of the line so that when i want to take it part.. i can just twist ..or what ever to a thing and it comes apart ..but water stays inside?..

Senater_Cache · 01-08-2005, 04:56 PM

plexy man

two sheets with air in between for a little insulation.

cant you crack the window? as in tilt it open?
if so, just route the tubing through the split.

Wizard James · 01-08-2005, 05:02 PM

its such a wonderfuly made window that just to get it open for a 3/4 gap.. its open almost all the way.

01-08-2005, 01:28 AM	#1 (permalink)
Wizard James First Lieutenant Join Date: Oct 2004 Location: canada, calgary alberta Posts: 1,513	AHH back to water well.. back to water.. rhino can explain my ideas better.. since i can hardly understand them ..but heres a short little run down. rad is going to be outside were its ..around -10 to -30 its going to be zip tied to my safty bars then have a litttle roof, heres the flow res pump cpu hc res pump... 100% window washer fluid so it dont frezz and gives off a nice blue color. pump and res are going in the cubard above my desk .. drill some holes for wires and hose .. my pump makes a high pitch noise.. i am hoping having it in the cubard will help. ....... __________________ Dark Wave(main pc) a64 3500+ at 2.3-6 ghz..and still going faster (xp-90 coolin it ) DFI lanparty sli-dr 6600gt BFG @ 580/1205 2 Gigs of performance OCZ 223mhz 3-3-3-7 1T 250 sata II hdd, over 300 gigs on network Ocz 600 watt psu I AM A PHPBB TECH NUT if you need help with phpbb, just PM me --------------------------------------------------------- Thanks guys for all the donations, if you want to still help, fold for me "wizard_james" heatware

01-08-2005, 11:01 AM	#4 (permalink)
Wizard James First Lieutenant Join Date: Oct 2004 Location: canada, calgary alberta Posts: 1,513	its going to be -20 outside for the next few months.. i am going to mix a bit of water in..not much tho. i also am having a res.. its a 3 L res.. only half full tho.. going to use that to fill everything.. all custom tho..gota get some more wire today.. well..off to have a bath then i get ready to go and get my stuff.. THANK GOD i get to take the torndao off.. or ..i could use that for the res LOL NOT .. to much power lol. __________________ Dark Wave(main pc) a64 3500+ at 2.3-6 ghz..and still going faster (xp-90 coolin it ) DFI lanparty sli-dr 6600gt BFG @ 580/1205 2 Gigs of performance OCZ 223mhz 3-3-3-7 1T 250 sata II hdd, over 300 gigs on network Ocz 600 watt psu I AM A PHPBB TECH NUT if you need help with phpbb, just PM me --------------------------------------------------------- Thanks guys for all the donations, if you want to still help, fold for me "wizard_james" heatware

01-08-2005, 02:34 PM	#5 (permalink)
Wizard James First Lieutenant Join Date: Oct 2004 Location: canada, calgary alberta Posts: 1,513	FREAKING PERNETS ..god i wish i was older. ffs i am 15. and nooo..everything i think of they decine.. its like .. No NONONONONO that wont work..u cant do that. ..no.. they were cool on everything till i said the window and taking it out and putting foam in placement. (window already comes out..just would have to make a foam window.) they said (becasue i am in the basement) that mice and bugs would eat though the foam.. well..i was going to be putting something else..donno yet ..that is harder on the outside..but god forbed they work with me, everything works and would work..but hell..to be able to do anything i want.. they keep saying also what am i going to do when it gets warming.. THE SAME THING EVERYONE ELSE DOES i yelled (yeah..i yell alot...) lower my overclock. so ..the temp goes from -5 to 10 and in summer its 15-25 ....they asked if i am going to put the rad inside..i said no..its only would be cooler by 2-3 dregres..Like wtf is soooo hard to get tho his thick mind (step dad.. i hate him ...hated him since i first meet him). well..might be a bit longer till i get water cooling.. wana get a ative heatsink for my nb ..thinking a nb-1c with the fan. ..anyone help me here? if u want i will post a pic of were my computer is and what i am thinking to do ..if words are not helpong __________________ Dark Wave(main pc) a64 3500+ at 2.3-6 ghz..and still going faster (xp-90 coolin it ) DFI lanparty sli-dr 6600gt BFG @ 580/1205 2 Gigs of performance OCZ 223mhz 3-3-3-7 1T 250 sata II hdd, over 300 gigs on network Ocz 600 watt psu I AM A PHPBB TECH NUT if you need help with phpbb, just PM me --------------------------------------------------------- Thanks guys for all the donations, if you want to still help, fold for me "wizard_james" heatware

01-08-2005, 04:37 PM	#7 (permalink)
Wizard James First Lieutenant Join Date: Oct 2004 Location: canada, calgary alberta Posts: 1,513	i said that to my mom (who is the only one in the house who would sit down with me and talk.) but she keep saying no matter how i did it ..cold air would come tho. i DONT see anyway ..if i have plywood..and then foam.. and have it all taped up/ or sealed with sealent.. but in spring shes going to get a new window (ahh no far) one that slides..and then i can do what i want...but right now i tink i am going to just put it up above my cabards. also..since i am going to have it all connetneted.. is there ..a quick release thing i can put right in the middle of the line so that when i want to take it part.. i can just twist ..or what ever to a thing and it comes apart ..but water stays inside?.. __________________ Dark Wave(main pc) a64 3500+ at 2.3-6 ghz..and still going faster (xp-90 coolin it ) DFI lanparty sli-dr 6600gt BFG @ 580/1205 2 Gigs of performance OCZ 223mhz 3-3-3-7 1T 250 sata II hdd, over 300 gigs on network Ocz 600 watt psu I AM A PHPBB TECH NUT if you need help with phpbb, just PM me --------------------------------------------------------- Thanks guys for all the donations, if you want to still help, fold for me "wizard_james" heatware

01-08-2005, 05:02 PM	#9 (permalink)
Wizard James First Lieutenant Join Date: Oct 2004 Location: canada, calgary alberta Posts: 1,513	its such a wonderfuly made window that just to get it open for a 3/4 gap.. its open almost all the way. __________________ Dark Wave(main pc) a64 3500+ at 2.3-6 ghz..and still going faster (xp-90 coolin it ) DFI lanparty sli-dr 6600gt BFG @ 580/1205 2 Gigs of performance OCZ 223mhz 3-3-3-7 1T 250 sata II hdd, over 300 gigs on network Ocz 600 watt psu I AM A PHPBB TECH NUT if you need help with phpbb, just PM me --------------------------------------------------------- Thanks guys for all the donations, if you want to still help, fold for me "wizard_james" heatware

01-08-2005, 02:46 AM	#2 (permalink)
rhino56 Administrator General Join Date: Feb 2006 Posts: 6,813	i cant wait to see what the results will be.

01-08-2005, 09:59 AM	#3 (permalink)
Anonymous First Lieutenant Join Date: Oct 2004 Posts: 1,543	dont use 100% of that stuff you need some water (carries more heat).

01-08-2005, 02:45 PM	#6 (permalink)
Anonymous First Lieutenant Join Date: Oct 2004 Posts: 1,543	plywood on the outside??

01-08-2005, 04:56 PM	#8 (permalink)
Senater_Cache Sergeant MajorElite Commander Join Date: Oct 2004 Location: Chicago, IL Posts: 861	plexy man two sheets with air in between for a little insulation. cant you crack the window? as in tilt it open? if so, just route the tubing through the split.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
i just got my weight set back	rhino56	Health & Fitness	14	09-09-2005 11:58 PM
Back from the 50's	aronmartin	General Discussion	18	08-10-2005 02:35 PM
Additives for water.	Mark620	Water Cooling	5	11-28-2004 12:10 AM
Watercooling Myths exposed...	Senater_Cache	Water Cooling	8	11-25-2004 08:35 PM