My rig so far

moho · 02-02-2006, 02:29 AM

not quite finished, still waiting on my NeoHe 550W
This is the one that will hold my 4gHZ Prescott
I dremeled a hole on the top for the rad, it takes about 2 cdrom bays, its ok i didnt use them anyway

.
Components:
Aquaman 550GPH pump
120MM rad
dangerden res.
mcw50,mcw5000
also ordered some Blue UV dye, and 2 12" logisys cold UC cathodes.

will be holding:
2.4A@4GHZ+
1gb ddr
9800Pro
IS7-E
80GB sata
DVDrw/DVDrom
NeoHe550W
SB audigy.
Will post some more pics after i get everything setup and running.
Will probably look neater and nicer then

Nettles · 02-02-2006, 03:34 AM

Man, if my case could get half as clean on the inside I'd be happy, nice OC

That thing doesn't boil the water? Hehe, j/p, nice setup.

rhino56 · 02-02-2006, 03:46 AM

gonna be an awesome rig

=ACID RAIN= · 02-02-2006, 10:42 AM

Damn, what's the stats on that pump?

BTW rig is nice and clean (wait till you install the wiring)

moho · 02-03-2006, 08:54 PM

4200Liter per hour
it will look alot different once it is fully installed

moho · 02-05-2006, 11:54 PM

screenshot@a whopping 1.6V

ill post some physical pics later

Nettles · 02-05-2006, 11:58 PM

Nice OC... wish my North could've gotten that high...

moho · 02-06-2006, 01:13 AM

I didnt get to do cable management yet

BTW halo runs SO smooth, i havent gotten to OC the 9800pro yet!

rhino56 · 02-06-2006, 03:15 AM

wow man that is a nice chip. very nice rig

moho · 02-10-2006, 11:53 PM

Been working on it for awhile, and WOW!
Scored #3 for a 2.4GHZ!
a little more tweaking and i think i can break the 2nd score...
http://valid.x86-secret.com/show_oc.php?id=70867
http://valid.x86-secret.com/search.php
2.4A@4.5GHZ. It was a suicide run! 1.7Vcore!(Bios showed 1.63)
YAY!

p.s. imagine what this coulda done in a Max-III!
too bad i sold it a few months ago

02-02-2006, 02:29 AM	#1 (permalink)
moho Specialist Join Date: Mar 2005 Location: Frozone Posts: 103	My rig so far not quite finished, still waiting on my NeoHe 550W This is the one that will hold my 4gHZ Prescott I dremeled a hole on the top for the rad, it takes about 2 cdrom bays, its ok i didnt use them anyway . Components: Aquaman 550GPH pump 120MM rad dangerden res. mcw50,mcw5000 also ordered some Blue UV dye, and 2 12" logisys cold UC cathodes. will be holding: 2.4A@4GHZ+ 1gb ddr 9800Pro IS7-E 80GB sata DVDrw/DVDrom NeoHe550W SB audigy. Will post some more pics after i get everything setup and running. Will probably look neater and nicer then

02-02-2006, 03:34 AM	#2 (permalink)
Nettles Moderator/ COD4 Addict First Lieutenant Join Date: Aug 2005 Location: SFA Posts: 1,677	Man, if my case could get half as clean on the inside I'd be happy, nice OC That thing doesn't boil the water? Hehe, j/p, nice setup. __________________ HEAT

02-02-2006, 10:42 AM	#4 (permalink)
=ACID RAIN= Chief Warrant Officer Join Date: Jan 2006 Location: TX Posts: 1,241	Damn, what's the stats on that pump? BTW rig is nice and clean (wait till you install the wiring) __________________ Personal Site: http://www.goinglimp.com COD2 Clan: http://www.arsr-clan.com

02-03-2006, 08:54 PM	#5 (permalink)
moho Specialist Join Date: Mar 2005 Location: Frozone Posts: 103	4200Liter per hour it will look alot different once it is fully installed __________________ ...0...x...X...o...X...0...x...O...x ...0...x...X...o...X...0...x...O...x ...0...x...X...o...X...0...x...O...x ...0...x...X...o...X...0...x...O...x ..0...x...X...o...X...0...x...O...x ___________________________ ^^bullet holes ;)^^ _________________________________ Heat is under MOHO

02-05-2006, 11:54 PM	#6 (permalink)
moho Specialist Join Date: Mar 2005 Location: Frozone Posts: 103	screenshot@a whopping 1.6V ill post some physical pics later __________________ ...0...x...X...o...X...0...x...O...x ...0...x...X...o...X...0...x...O...x ...0...x...X...o...X...0...x...O...x ...0...x...X...o...X...0...x...O...x ..0...x...X...o...X...0...x...O...x ___________________________ ^^bullet holes ;)^^ _________________________________ Heat is under MOHO

02-02-2006, 03:46 AM	#3 (permalink)
rhino56 Administrator General Join Date: Feb 2006 Posts: 6,863	gonna be an awesome rig

02-05-2006, 11:58 PM	#7 (permalink)
Nettles Moderator/ COD4 Addict First Lieutenant Join Date: Aug 2005 Location: SFA Posts: 1,677	Nice OC... wish my North could've gotten that high... __________________ HEAT

02-06-2006, 01:13 AM	#8 (permalink)
moho Specialist Join Date: Mar 2005 Location: Frozone Posts: 103	I didnt get to do cable management yet BTW halo runs SO smooth, i havent gotten to OC the 9800pro yet! __________________ ...0...x...X...o...X...0...x...O...x ...0...x...X...o...X...0...x...O...x ...0...x...X...o...X...0...x...O...x ...0...x...X...o...X...0...x...O...x ..0...x...X...o...X...0...x...O...x ___________________________ ^^bullet holes ;)^^ _________________________________ Heat is under MOHO

02-06-2006, 03:15 AM	#9 (permalink)
rhino56 Administrator General Join Date: Feb 2006 Posts: 6,863	wow man that is a nice chip. very nice rig

02-10-2006, 11:53 PM	#10 (permalink)
moho Specialist Join Date: Mar 2005 Location: Frozone Posts: 103	Been working on it for awhile, and WOW! Scored #3 for a 2.4GHZ! a little more tweaking and i think i can break the 2nd score... http://valid.x86-secret.com/show_oc.php?id=70867 http://valid.x86-secret.com/search.php 2.4A@4.5GHZ. It was a suicide run! 1.7Vcore!(Bios showed 1.63) YAY! p.s. imagine what this coulda done in a Max-III! too bad i sold it a few months ago __________________ ...0...x...X...o...X...0...x...O...x ...0...x...X...o...X...0...x...O...x ...0...x...X...o...X...0...x...O...x ...0...x...X...o...X...0...x...O...x ..0...x...X...o...X...0...x...O...x ___________________________ ^^bullet holes ;)^^ _________________________________ Heat is under MOHO Last edited by moho : 02-11-2006 at 12:25 AM.